Announcement

Collapse
No announcement yet.

Lego-based inflation device

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lego-based inflation device


    A few weeks back I had my godson visiting for the weekend and that gave me an excuse to take out my Lego and enjoy some good old fashioned playing fun. At some point, I realised that some of the conical and cylindrical bricks could be very useful to create tugging devices. The last few days I've been experimenting with a DIY inflation device, which I found very comfortable for tensioning my inner foreskin. I added 2 pictures below of the setup.


    It consists of only 3 bricks and some tubes and a pump of the pneumatic system from Lego: a 4x4 base cone, a 2x2 base cylinder and a 2x2 base cone. The rigid tubes exactly fit the inner hole of the top cone without any leakage. For security reasons I added some more flexible tubing around to get a better seal, but in fact I feel it's not required. At the other side there is longer tubing that goes to the pump. After some initial tests I glued all parts together, so therefore I don't have pictures of the separate parts. I used a bunch of o-rings to fix the skin, but tape or retainers from other devices would do the same job of course...

    Just thought I should share it as some might have these lying around and might want to give it a try...




    Attached Files
    There’s no better feeling in the world than the warm embrace of your foreskin, so KOT!

    Progress gallery @ https://foreskinrestoration.vbulleti...s-report-tlc-x

  • #2
    Made a variation on the theme with my TLC-X and added a picture of the use of it. Really comfortable but for me mainly to use at home in short sessions with high pressure.
    There’s no better feeling in the world than the warm embrace of your foreskin, so KOT!

    Progress gallery @ https://foreskinrestoration.vbulleti...s-report-tlc-x

    Comment


    • #3
      That’s amazing honestly

      Comment


      • #4
        Seemed to work out well, but I’m still mainly going manual these days. Just thought it was worth sharing for inspiration
        There’s no better feeling in the world than the warm embrace of your foreskin, so KOT!

        Progress gallery @ https://foreskinrestoration.vbulleti...s-report-tlc-x

        Comment

        Working...
        X