Announcement

Collapse
No announcement yet.

DTR Pinching

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DTR Pinching

    Has anyone else had problems with the dtr pinching the skin to tight while tugging? I am using it without the pusher and using the Holed gripper. It's comfortable for a hour or so but feels like it's "grippin" to tight with heavy to even light tension. Any tips?

  • #2
    I've heard that the dtr only comes in one size......used for larger ones...
    .

    Maybe the holes are causing presure points amd constricting blood circulation. I may suggest to accurately measure tension using a weighing scale or electronic luggage weigher (Many model can measure opposite weight[push]). Use only gentle tension, about 8-12oz. Some discomfort is normal but never tolerate pain


    I dont have a dtr though so you may want to take other opinions too.

    Comment


    • #3
      Thanks Nomad, I ordered a tlc tigger today to compare the two. Hopefully it helps out and I can wear it for more then 2 hours without a break. It's definitely not the tension as I've worn it with 0 tension and had the same effects. Must be to tight on the skin.

      Comment


      • #4
        Yeah I own a TLC X and it's really comfortable to use. I even wear it own my sleep.

        Customer service on TLC is amazing and they will work with you till you get comfortably tugging.

        I heard that the dtr gives faster growth when you have much slack. You can go back to the dtr that way.

        Comment


        • #5
          Originally posted by James_here View Post
          Thanks Nomad, I ordered a tlc tigger today to compare the two. Hopefully it helps out and I can wear it for more then 2 hours without a break.
          and ?
          what are results ?
          would you write you comparison ?

          Comment


          • #6
            The tlc is still in the mail. Takes a while to deliver to Canada. I will write my comparison for sure.

            Comment


            • #7
              ok. thanks )

              Comment


              • #8
                I had pinching problems with the TLC-X pusher - I think I might have ordered it a little too small; consequently the squashed glans splays out slightly wider than the pusher and the sharp sides of the pusher apply pressure onto - rather than eactly around - the sensitive glans.

                My solution was to fold a piece of absorbant lavatory paper into a square slightly larger than the diameter of the pusher and insert this between glans and pusher.

                The paper acts as a pressure buffer; is no so large as to detrimentally affect the gripping action of the cone; and has the added advantage that it also absorbs moisture.

                Comment

                Working...
                X