No announcement yet.

Presenting a new Company - www(dot)foreskinned(dot)com

  • Filter
  • Time
  • Show
Clear All
new posts

  • Presenting a new Company - www(dot)foreskinned(dot)com

    I would like to introduce my company and I hope that we will have a good dialogue. My company is established in Sweden and we are a few engineers who have developed products that are safe, efficient, and comfortable to wear. We have a long-term vision of being a positive part of this community.

    Over the next two weeks, we will launch our products by showing them in this forum. The store will be officially open by the last of August. You will be involved in choosing colors and get priority to the store before it opens to the public.

    Standard - Medical Grade ISO 10993 by USP.

    Our products are medically classified, which means that the materials are approved for prolonged contact with human skin. It is the United States Pharmacopeia agency that ensures and approves materials used in the healthcare industry.

    USP - Class I

    We have selected an American/English supplier and the factory is located within the UK. The company is listed on the U.S. Stock Exchange (S&P 600).

    Basic problems found on today's products as well as our solutions...

    Gripper – Slips off.

    Silicone has a low friction ratio compared to our comparator material. We are testing a different type of gripper and the advantage of the other material is that it has a significantly higher friction ratio. This means that the product does not slip off your skin. But we are then faced with a new problem. The second material is not able to cope with skin creams and oils well, without the material losing its integrity over time. Silicone has high material integrity which means that it ages well.

    What do you choose?

    Material X: A gripper that holds firm to the skin - but wears out over time (3-12 months) if you use oils. If you have clean skin and do not use any oils the gripper will not lose it integrity.

    Silicone: A gripper that holds the skin reasonably well – but that never needs to be replaced.

    We have a different design on our silicone gripper, and they are specifically designed to grip as well as possible around the frame and skin.

    We will let you decide on this matter…

    Crusher of glans (Product 1 - our DTR)

    We have created a soft pillow. Your glans will not be “crushed” by the device. The problem is gone.

    Screws fall off (Product 1 - our DTR)

    We have a new type of mechanical locking between the frame, rod, and the lock. You lock the product without screws, so now nothing can fall off the product.

    Retainer (Product 2 - our Retainer)

    Most retainers on the market are either O-rings or completely round. The problem with O-ring is that you cannot sleep with it due to safety. The problem with retainers, on the market, is that they are not shaped like the anatomy of a penis. We have followed the exact measurement, as accurate as possible, of the glans. All men have a longer head (on the upper side) than on the underside.

    Simply put, we have developed a retainer that is fantastic. It will fit perfectly on, even if you get a hard-on… Given that you have enough loose skin for it to allow. That is just mind-blowing! I am a CI2.5 and I can sleep with my retainer. The first few nights are difficult due to the new feeling. I kept taking it off while sleeping. It fell off a few times, the design of the product is like that. If you move much and sleeps unrestful the device will slip of. When you use it on the day, then it will be in the right place all day long.

    The absolute best comes now: Our retainer "teaches" your foreskin how it should be on the glans. The result is that my skin unfolds over the glans by itself to an increasing degree. Our retainer has a 7.5%-degree forward tilt downwards. The purpose is for the skin to lie downwards so that it mimics an uncircumcised man's penis, and nobody can tell the difference between a natural foreskin and a foreskinned (restored) man.

    Click image for larger version

Name:	P3-v3.png
Views:	641
Size:	2.68 MB
ID:	46632

    Air (Product 4 - our Air)

    The current Air products, on the market, appear to have one of the following defects: Air leaks out, grippers do not hold, grippers hold on too tightly or the product is not available on the market. We have succeeded in developing an Air that is airtight and that does not grip too tightly around the frame. You can fill up the device with extremely high pressure. I use the product daily and can say that it works fantastically. However, be careful with the pressure... Don't push in so much that it's starting to hurt really bad. I've tested it and it wasn't very nice. (Believe me!).

    Weight (Product 5 - our weight-oriented product)

    There are several different solutions to weights. We have found an elegant solution where you can easily adjust how much weight you want on the product. The product consists of stainless steel, so now worrying about magnetic tension.

    In conclusion,

    We currently have 5 products and they will be presented one at a time. We will start with product 2 later today.

    Color selection

    Vote for which color you think is best! We have three different options. If you would like to see another, just write down the color and link it to a sample. If someone finds a different color and that color wins the contest, the person will get a free product of his choosing with a personal letter from me.

    Dialogue – Suggestions for improvement and wishes.

    I have created these products based on my own need for safe, efficient, and comfortable devices to wear. We have put in considerable time on the design. But we are here to listen and are open to your creativity if you have any improvements to share. Write about opinions, ideas, suggestions, and thoughts here. Alternatively, send them to the company on the following email:

    [email protected]


    Sign up on the email list and we will let you know when the store is open. Spread the link to your friends and our other partners.


    We do not see you as a consumer. We see you as partners on the journey towards restoring your foreskin. I am in the same boat as you are in and I have, literally, my skin in the game alongside you. We are grateful to have the opportunity to create these devices and believe that you will be amazingly satisfied with these products.

    Stopping circumcision

    We see ourselves as part of the intact movement and will over the next few months/years become part of the global movement toward stopping circumcision. Circumcision of children must stop, and we want to become a part of that movement in the same way that we become part of your restoring process. This of course presupposes that you are interested in our products... and let's say. We have every confidence that you will be.

    Sincerely yours

    Attached Files

  • #2
    Lol, one commercial company invading another commercial company's website. No nobility involved in it, but it's standard strategy when a dollah is involved (on both sides).


    • #3
      I’m new to this, but have created a DIY tugger, that I been using 6 hours every other day since July. How much is your product and can i wear it for sustained >6hrs or more daily. MY circumcision index is C2.


      • #4
        The material is medically graded. In plain English: You can use it all day long because the material is approved for 24 hours use. Product 2 (retainer) is used for protecting the glans when you are not tugging. It is very important to cover the glans as a ground-rule. In that way, your sensitivity starts to come back fast.

        We will present the other (tugg-)devices in the coming days and weeks.


        • #5
          I like the idea of a gripper that is textured to stay on better, assuming it wasn't uncomfortable to wear. I LOVE the idea of the pillow. I often put a folded piece of toilet paper between my glans and the pusher for the very reason that it helps prevent the glans from feeling too much pain after long sessions. Hope your product does well!


          • #6
            Hi Partners,

            Click image for larger version  Name:	P5-v2.png Views:	0 Size:	3.37 MB ID:	46667

            We have carefully crafted each aspect of the device. The bell will feel great because it has a cover of silicone. By choosing such a solution you get a better grip and a softer surface. The ground weight is 7.0oz (200 gram) and the standard additional weight is 7.0oz (200 gram) or 11.0oz (312 gram). We will use stainless steel.

            We would love to get your input. Do you experience with regard to weight devices? Share with your fellow friend and help us get your insights. Keep a positive tone. This forum is about sharing and supporting fellow men who are restoring. For most of us, it is important to get to know about new devices and everybody can benefit.

            Do you want to see our dual tension restorer or air method next?

            Sign up on the Mail-list at and help us spread the word. Members will get access 30 of August. The store will be open for the general public 1 of September.

            Vote on the color:

            Ben / Foreskinned


            • #7

              Thank you for the kind comment! We will do our best.


              • #8
                Hi friends and fellow restorers!

                I am happy to present our new foreskin restoration devices. Let us have a constructive and positive discussion environment. We are doing meaningful work and want to cultivate meaningful relationships within this community.

                Dual Tension Restorer (Our version of DTR)
                One of the most obvious features is a cushion/pillow to protect the glans. The lock is pushed upward and lock the bell on the rod. We have also created two wings for the rubber band. The lower of the holes can be used in the beginning for beginners who might not want to much tension at the start. The griper is created for this maximum compatibility with the bell. Works for both inner and outer foreskin.

                Click image for larger version

Name:	P1.png
Views:	623
Size:	3.85 MB
ID:	46750

                This thing of beauty was the hardest one to design. We hade trials and errors and had to solve a lot of problems. But in the end, it was worth the work. The device is sealed and you can push the pressure high without a blowout of the skin nor leaking air. The gripper is quite soft and won't hurt. I use this device for 2-4 hours each day. Works mainly with the inner foreskin.

                Click image for larger version

Name:	P4-2.png
Views:	516
Size:	4.85 MB
ID:	46751

                This device is straight forward. We wanted an easy device to wear while at work or walking and constant tension. The beauty is with the way you can strap it. It doesn't go to the shoe/socket but rather to a band. The band does not sit around the waist or the shoulder. You will actually laugh at the simplicity. Our band sits right below the knee and you strap the device wit a rubber. You will have almost the same tension while standing or sitting. The most creative solution is almost always easy to do and hard to think about. We worked with different solutions with 1-2 bands and so on. But one of the guys just dumb-it-down.

                Click image for larger version

Name:	P2.png
Views:	543
Size:	4.69 MB
ID:	46752

                The members on our mail-list (, sign up) will get access to the shop first around 10 am to 2 pm. We send out the password by mail. Look at your spam-filter if you haven't gotten it by 2 pm on the 30 of August. About 4 hours later we will release the password hear. The official opening of the store will be on the 1 of September. We will start with an opening offer for a week.

                Thought, suggestions, and improvements
                We are open to any feedback from you. We will be committed to this community onward and will develop the products as we get more feedback from restorers.

                Further information
                Pricing, the opening offer, and so on will be clear, once you access the store. Let the discussion be around initial thought about the your impression and our questions below.

                Should we send a totally discreet and neutral package without the logo? We need your input on this matter. Some people do tell friends and family about their restoration. Others are discreet about the matter and do not want attention. We are inclined to go with the discreet packaging but are not sure about most restorers feeling toward that subject.

                Ben Founder of Foreskinned


                • #9
                  This looks pretty sleek. The simplicity is appreciated. My question is : besides the cushion for the glans, how is the dual tension design different from, say, the DTR?

                  Also, how does the air design work? Will you provide a video demo?

                  Good luck!


                  • #10
                    Hi BeforeskinProject,

                    The tension works in the same way. It is slight differences in how the pressure works on because of the differences in the design, but the dual tension is the same in the theory. You have the pusher and the plate. You can either use rubber band or lock the product with the lock (instead of screws).

                    We have put in a lot of work on the Air device. It is airtight and can hold high pressure without blow out the skin. The gripper is firm, but won't hurt. So we are pretty happy with the device. In a couple of weeks or months, people will show pictures online and we will then present both video instruction and pictures with high quality. We choose the 3D rendering because so to minimize the risk of "copy-the-product" companies/people.

                    Thank you!

                    Ben Founder of Foreskinned


                    • #11
                      Looks cool. Can the dual tension device be used without rubber bands by locking it into the holes? Also, do you have any plans to sell spacers to extend the length of the cone as people grow out?


                      • #12
                        Thank you for the comment.

                        If you look at the picture of the device you can see two different placement of the bell on the rod. The one to the left is an unlocked lock. It is pressed down. The on to the right is placed a bitter higher on the rod. The lock is press upward and locks the bell in that place. We will send manual with the device and also post videos online, once the devices are launched onto the market.


                        • #13
                          Nice - the site is up and running! Money's tight right now, but I'll be keeping an eye on this. It may become part of my future restoring regimen If others invest in one of these, I hope to see it here! Good luck to the Foreskinned group


                          • #14
                            Hi BeforeskinProject,

                            Thank you for the kind words! We appreciate the support and look forward to having you as a customer in the future.



                            • #15
                              Hi, just curious if anyone have tried this device. I'm interested but I haven't been able to find any reviews on it.