Any users in the Forum who can share their experience with the PUD weighted device? I am not sure about the taping everyday - so wondering if O Rings work or there are other tips.
Announcement
Collapse
No announcement yet.
PUD Device
Collapse
X
-
Originally posted by Floodwater View PostAny users in the Forum who can share their experience with the PUD weighted device? I am not sure about the taping everyday - so wondering if O Rings work or there are other tips.
Taping every day can result in skin abrasion and damage whether or not the tape is removed carefully. So, every other day or so would probably be better if you plan to use a PUD as your primary restoration device. A PUD also only works when gravity is in play. In other words, you need to be standing or be able to allow the PUD to hang free while sitting. Otherwise, unlike a tugger when properly tensioned, it's not doing anything. However, unlike a tugger, the degree of tension w/a PUD when it is freely handing is never in doubt and if it is properly attached will not fall off.
Given the size of the PUD, you need to wear fairly loose fitting pants and in order to keep it from flapping around should be worn under some compression shorts, which is what I do. On the other hand, if you want to attract a lot of attention, especially among gay men, feel free to wear one unconstrained under a pair of tight jeans. I'm sure you will attract attention -- wanted or not.
I wear a 22oz PUD that is no longer made. Started w/an 8oz one that I sold long ago that is also no longer made. 22 oz is probably more than most people would care to have attached to the end of their cock but I have very thick, strong and elastic skin and can wear it all day w/o any discomfort. American Bodycrafters (the seller of PUDs) currently sells 2 styles in weights varying between 10-18oz. The amount of weight you can tolerate will depend on the strength/elasticity of your foreskin. Since PUDs are not returnable and very expensive, the choice of what weight to purchase is pretty important, you can gauge your weight tolerance by attaching fishing sinkers to the end of your tugger.
If you have any other questions, feel free to ask.
Last edited by Swingshiftworker; 03-25-2016, 12:01 AM.
- Likes 1
-
Thanks for the info. You are right about being on your feet to get the effect. and if that is the case I can hang a water bottle off any of my devices and get the tugging. Just curious do you also have a DTR or TLC? If so when you tug do you also push in the plunger? I have been restoring for 6 months. I will post photos.
Comment
-
Originally posted by Floodwater View PostThanks for the info. You are right about being on your feet to get the effect. and if that is the case I can hang a water bottle off any of my devices and get the tugging. Just curious do you also have a DTR or TLC? If so when you tug do you also push in the plunger? I have been restoring for 6 months. I will post photos.
- Likes 1
Comment
-
I have a tlcx and I use it w the weights about 3-5 hrs per day ( slowly increasing the time & weight). Just started restoring about 4 months ago, and just started using the oxballs cock ring to help hold my penis and ballsack away from my body so the tension is applied more directly to the new foreskin. I stopped using the tlcx in dual tension mode as I kept injuring my glans w the pressure...if you do use dual tension AND weights be very careful and check the pressure as it can be too much. That said the weights hang and attach easily that Ron sells at tlc tugger.com and so I just use the device as a way to hold the weights not in dual tension
- Likes 1
Comment
-
I have been using a PUD for years and threw out the tape years ago. I put a baby bottle nipple on the PUD and have used it that way for the past 7 or 8 years, but recently decided to try a silicone sleeve and found that to be a game changer. The sleeve does not pinch at all! This morning I ordered a few different kinds of sleeves and will let you know what seems to work best. Ebay sells a bunch of sleeves for use inside a penis pump cylinder that work great for hanging a PUD. Attached is pic with the DTR nipple and a ball weight that I recently added to the program. I found that pulling the scrotum skin leaves me not enough foreskin so decided to do some stretching there as well if I am ever going to achieve a CI 10, I need more skin, turkey neck be damned...1 Photo
- Likes 6
Comment
-
Check out the ZenToes Toe Cap protector. I bought a pack from Amazon, cost was around $11 for pack of 6. This is a closed end silicone sleeve made to protect your big toe during healing. I cut the closed end off and voila, a super soft sleeve with a perfect fit to slide over my PUD and penis. Seems to fit and feel great, will update with a picture or two.
- Likes 1
Comment
-
As promised, here is a pic of me wearing my PUD with a Zen Toe silicone sleeve being used as a gripper.
It is a quite flexible and stretches well in all directions. I found it to be a bit too thin and flexible though as it allows the PUD to work its way down to where it will eventually want to come loose. It is very comfortable though and will hang on solidly for a long time depending on your activity at the time. The sleeve is held on with a small Grafitti band silicone band that locks the sleeve onto the PUD.
To update, the latest sleeve I have been using I recently ordered from Ebay and is remarkably strong and still flexible. It comes in a 6" length and I folded it over the blade of a pair of scissors to cut it into 4 sleeves approx 1.5" long. These sleeves work.
Last edited by TuggingNLA; 04-27-2019, 12:19 PM. Reason: Update on potential sleeves for PUD attachment
- Likes 3
Comment
-
Originally posted by TuggingNLA View PostAs promised, here is a pic of me wearing my PUD with a Zen Toe silicone sleeve being used as a gripper.
It is a quite flexible and stretches well in all directions. I found it to be a bit too thin and flexible though as it allows the PUD to work its way down to where it will eventually want to come loose. It is very comfortable though and will hang on solidly for a long time depending on your activity at the time. The sleeve is held on with a small Grafitti band silicone band that locks the sleeve onto the PUD.
To update, the latest sleeve I have been using I recently ordered from Ebay and is remarkably strong and still flexible. It comes in a 6" length and I folded it over the blade of a pair of scissors to cut it into 4 sleeves approx 1.5" long. These sleeves work.
https://www.ebay.com/itm/6-Silicone-....c100290.m3507
- Likes 1
Comment
-
I have been restoring my foreskin for quite a while and have grown a lot of new scrotum skin along the way, so I had quite a head start. Since I had the skin, I decided to try a ball weight to put tension on the testicle cords so my balls would hang a bit lower as well as grow my skin on the under side of my shaft. I have only been doing this for a month or 6 weeks or so and have found I can wear a stack of weights 50mm tall 1.5 pounds or so, no problem. Seems like a lot since I am a beginner. The hardest part seems to be finding the right size so that it is tight enough that it won't slip off, but not so tight that it cuts off circulation. So yes, they work in my limited experience.
- Likes 2
Comment
-
I got a 14 ounce P.U.D. A few months ago to switch things up and now switch between it and the DTR. I haven’t worn it out in public yet since I have been working from home. I use a sports tape to fasten it and have yet to have it come off. The sports tape is the type you’d tape your hands for boxing. Very sticky even with moisture. So far I enjoy using it and think it gives a nice tug. By the time I take it off it is hanging pretty good.
Comment
Comment